Ask Experts Questions for FREE Help !
Ask
    sunshine12963's Avatar
    sunshine12963 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 13, 2013, 08:27 PM
    Rheem RGDA - 075C - ER with standing pilot...
    Rheem RGDA - 075C - ER with standing pilot... is there an alternative way to ignite? Having a difficult time to ignite, help..
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Nov 13, 2013, 08:48 PM
    How are you trying to light it & why the trouble?
    sunshine12963's Avatar
    sunshine12963 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Nov 13, 2013, 08:58 PM
    Trying to light the pilot with a fireplace lighter.. having a difficult time of getting air out of the pilot and to get the gas to flow through..
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Rheem rgda 075cer furnace pilot is lit but burners will not come on [ 0 Answers ]

I have tried turning the unit off and relighting the pilot and the burners will still not come on

Lennox standing pilot valve [ 1 Answers ]

I have an old Lennox space heater in my warehouse. The standing pilot valve has malfuctioned and would like to repair it. I believe the part number is V5114-100 or 15AGAC1. I am having difficulty find a replacement part. What are my repair options?

RHEEM furnace standing pilot system [ 0 Answers ]

HI, I have a Rheem furnace that when it ignites the blower motor starts immediately, there is no delay allowing the heat exchanger to heat up before it kicks on. I've also noticed that the pilot goes out periodically, I believe the blower motor is pushing so much air that it blows it out. I've...

New blower motor - Rheem furnace model # rgda-07ea-cr, 75,000 BTU. [ 9 Answers ]

Hi - I have a 1987/88 Rheem furnace model # rgda-07ea-cr, 75,000 BTU, natural gas. The blower motor is starting to get noisy and vibrate. I pulled it out and took it apart and looked at the bushing and shaft and see the shaft is wore, so thinking there is not use just replacing the bushing. ...

Standing pilot [ 1 Answers ]

I have a problem with my pilot to stay on.I cleaned the orfice and installed new thermocouple.and still don't stay on.it a comort aire furnace.just wondering if the gas valve needs to be replaced.thank for Comments.

View more questions Search