Ask Experts Questions for FREE Help !
Ask
    ugadog's Avatar
    ugadog Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 12, 2013, 06:28 PM
    Insinkerator Switch Button Problem
    Hello. We own a Model 17 85A Insinkerator disposal. I understand how it functions. It is a batch feed with the on-off button in the drain. The button has quit working, although the switch is functional. I removed the box-shaped cover for the switch. I am totally puzzled as to how to remove the button. There is a small circlip around the button shaft, which I removed. That's where things stopped. The shaft comes through a circular piece of metal which appears to be sealed against water. There is a piece of plastic with a pointer set in the "9" position. The area is surrounded by a metal piece that looks like it could be removed, but I don't see how. The replacement kit button looks like it screws on. I can see no way to remove the old button. Any help would be deeply appreciated.
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #2

    Nov 13, 2013, 11:52 AM
    Can you post a picture?, Thanks.

    John
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #3

    Nov 13, 2013, 02:43 PM
    Hi Ugadog

    I believe you just squeeze the cover from side to side and it "pops" out... ;)

    Give that a shot...

    Mark
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How can I wire a light switch with 3 switches on into 1 push button switch? [ 1 Answers ]

I am looking to changing some of the light switches at my church to push button timer switches to prevent the lights being left on. Some of the rooms have 3 switches for 3 lights but I only want 1 button? Any idea?

How to fix a restart button on insinkerator t 17?what other thread? [ 3 Answers ]

York residential furnace pressure switch problem code stuck switch [ 1 Answers ]

I have a york furnace P2MD12H06401A after 1 hour it shuts down and gives a 2 flash error for a stuck pressure switch. The switch is new can it be wired wrong? The old one had 2 white wires piggy back and 1 blue wire. The new switch has 3 separate terminals

InSinkErator Pro 17 stops working and red reset button doesn't fix it anymore [ 3 Answers ]

Our InSinkErator Pro 17 disposer was acting up recently. It would stop grinding and will do this humming noise. First couple of times, resetting the red button on the bottom would fix it. Now, resetting the button doesn't change anything. Moreover, after a few tries the bottom part of the...

Press sleep button and switch on/off button to be able to see login screen [ 1 Answers ]

Friend of mine has got problem with his new desktop (XP SP2) , when he starts the PC it boots normally till it reaches where it shows windows XP logo then the screen gets blank (i.e he can not see the login name for users). What he used to do: is press the sleep button on the keyboard, then...

View more questions Search