Ask Experts Questions for FREE Help !
Ask
    Silverado14's Avatar
    Silverado14 Posts: 4, Reputation: 1
    New Member
     
    #1

    Nov 7, 2013, 07:58 AM
    New Electric Fireplace Insert by febo.
    New Electric Ireplace insert With remote. It Will Not Turn Off Or on When It reaches temp. It will just keep running Even though Suppose to shut of within 6 Degrees of set Temp. This Is second new Insert. Any Suggestions?
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
     
    #2

    Nov 7, 2013, 08:00 AM
    I'd contact their customor support number in the documentation. THey can establish if there was an installation issue.. or if in fact they had a bad lot and it would need returned yet again.

    Seriously,many consumer products are rarely fully individyually tested as is significantly cheaper to ship them all and deal with exchanges or warranty repairs when there are problems. ( they may only pull one unit out of every so many off the production line to check closely) Recalls usually only happen in cases where safety is involved.
    Silverado14's Avatar
    Silverado14 Posts: 4, Reputation: 1
    New Member
     
    #3

    Nov 7, 2013, 09:04 AM
    I Did Contact Them Several Times. They sent new remote & Motherboard For First Replacement. Hired Electronic Engineer to put in motherbooard. Still Didn't work. Sent Letter to Co We Bought it from. They sent Febo A Letter. So Febo did Send Second One. But It Won't Work. The Original Insert had Broken Glass But It Did Work but was A different model Number. Called Febo & They said this model Was Improved. Trying To Find A way I can Get Info on What else to do? Frustrated! Thanks!

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I repair my electric fireplace insert? [ 1 Answers ]

My electric fireplace does not stay on. I tried different outlets but the result is the same. When I push the Start button, it may go on for one second, then it beeps and goes out. The fan works fine and so does the heater, it Just won't stay on.

How do I repair my electric fireplace insert? [ 0 Answers ]

My electric fireplace does not stay on. I tried different outlets but the result is the same. When I push the Start button, it may go on for one second, then it beeps and goes out. The fan works fine and so does the heater, it Just won't stay on.

How do I repair my electric fireplace insert? [ 0 Answers ]

My electric fireplace does not stay on. I tried different outlets but the result is the same. When I push the Start button, it may go on for one second, then it beeps and goes out. The fan works fine and so does the heater, it Just won't stay on.

Insert fireplace repair [ 1 Answers ]

How do I replace the rear firebrick panel in a majestic sc42a fireplace insert

Fireplace Insert [ 2 Answers ]

We do not use the wood burning brick fireplace that came with our house. Because there is so much cold air coming down the chimney we would like to block it off from the inside. Is there an insert we can place below the damper so we can cut down on the draft? If so where could I purchase one. ...


View more questions Search