Not your question?
Ask your question
View similar questions
Check out some similar questions!
How do I remove a glued PVC pipe from a cast iron pipe drain in my bathroom?
[ 2 Answers ]
I have a very old house and have a cast iron pipe as the largest part of my waste drain in the bathroom. I want to place my toilet in a different area of the bathroom. If I want to do this, I have to remove the pvc elbo that is connected into the cast iron pipe. Is there an easy way to remove...
Dropped 1.5 inch square magnet with photo glued on in toilet. What to do?
[ 2 Answers ]
Dropped 1.5 inch square magnet with photo glued on in toilet. What to do? I tried reaching and grabbing it, but it had already gone too far. I tried plunging but the water level got lower.
How to remove glued ABS P-Trap elbow
[ 1 Answers ]
I need to remove p-trap elbow, glued to drain pipe 40 years ago. It is leaking and there is not enough drain pipe left to just cut it off. I would be even hard to drill into cement around drain pipe to get more of it out to glue new p-trap elbow. Any advice will be appriciate. Thank you very...
How can I remove carpet tack strips glued down on stairs?
[ 4 Answers ]
HELP PLEASE?! I wish to remove the very old, dust laden :eek: carpets located in the front stairwell. I lifted up a corner and see that there are wooden tack strips that are glued down VERY VERY tightly. I tried to pry one up and it was absolutely impossible. I would greatly appreciate any tips...
How to convert photo CD from Window Xp to Vista
[ 2 Answers ]
I have a photo cd made on Windows XP and would like to convert it to a/vista file to view on Windows Vista. View more questions Search
|