Ask Experts Questions for FREE Help !
Ask
    ClaraM's Avatar
    ClaraM Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 29, 2012, 07:22 AM
    Troy built 26J mini rider won't turn ovet
    I just bought a new mini rider the man at store helped me get it ready to use battery charged gas & oil I am a 64 y/o widow lady with no help he was so nice I got it home it cranked right up after a few minutes it quit wouldn't turn over do I called Troy built he said check fuse it was OK but still wouldn't turn over next afternoon I tried again and it cranked right up I finished my yard yesterday I tried to cut grass the 2nd time same thing it rsn great for a little while then quit I checked fuse it looked good but I replaced with a smart fuse to be sure still wouldn't turn over I think it's either in the ignition or safety feature can I disconnect safety features ? If so how do I do it the Troy built said take it to shop it had to be fuse or battery its not either one I can't get it to a shop and shouldn't have to it's new I just wanted a mower I could handle by myself if it sets up a day or so it usually cranks but who wants to take 2 or 3 days to cut a yard any subjection ?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #2

    Aug 6, 2012, 11:34 AM
    Hi,
    Since it is new, it is under warranty. Get the dealer to fix it since it not your fault.
    Peace,
    Clarke
    Charlesb151's Avatar
    Charlesb151 Posts: 2, Reputation: 1
    New Member
     
    #3

    Oct 23, 2013, 01:43 PM
    I had a problem with mine. The gas tank is higher than the Carburator and it would fill the cylinder with fuel and would not start. Sounded like a dead Battery. I had Steeles True Value in Tannersville, install a shut off valve before the Carburator. So when I shut it off, I close the valve and open it when I start it. It's been working fine since. The Mfg will not help under the warrany. Hope the helps you
    Charlesb151's Avatar
    Charlesb151 Posts: 2, Reputation: 1
    New Member
     
    #4

    Oct 23, 2013, 01:48 PM
    If this does not work. Bring it to a reputable Dealer that MTD works with. Your problem might be cover. Call MTD and be firm CB

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troy bilt rider [ 1 Answers ]

Hello I have a rider with steering column bearing worn out and don't know how to replace . Will drop the deck to get to bottom of column nut , but does the whole column come out from the bottom or top .I have taken the sreer. Wheel off to see if that would help? Mod # 13AJ 609G766 Ser....

My troy built 17.5 horse will not turn over completely [ 1 Answers ]

I have tried a new battery but it still barely turns over. When I remove the plug it turns over fine. When I put the plug back in and it does the same thing barely turning over.

I can't get my troy built rider mower to start [ 3 Answers ]

Hi , I'm a novice at this, so I've done all I can think of. I thought it was the battery, so I recharged it. Still no start. I made sure everything was in the right setting. No luck. I just went out and bought a brand new battery... nothing. I figure I must have the thing hooked up wrong, but...

Troy Built Mower [ 2 Answers ]

Where is the bolt to change the oil found?


View more questions Search