Ask Experts Questions for FREE Help !
Ask
    gemjr07's Avatar
    gemjr07 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 18, 2013, 11:30 AM
    Upgrade 2 wire mercury w enersaver globe 59000
    Only 2 wires connected to current switch grey and white yet three wires present all have colored thread 1 white 1 red 1 either grey or blue tried all different ways only seem to get the pilot to light no burner or fan coming on
    gemjr07's Avatar
    gemjr07 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Oct 18, 2013, 11:46 AM
    Old switch is honeywell new switch has OB/W2_R_W1_C_G_Y
    Done white to W red to R only pilot tried grey to R white to W only pilot again left grey and white and put red
    In C then G still only pilot lighting
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wright-rodgers mercury themostat where does the piml, and yellow wire go? [ 2 Answers ]

Where do the pink and yellow wires go?

Upgrade two wire thermostat to digital? [ 3 Answers ]

I tried to change out the thermostat with the digital but, when I unhooked the red and white wire from the old themostat the blower comes on and does not shut off. I hooked the new thermostat up white wire to W and red to RH and it still would not shut off until I hooked the old themostat back up....

Globe enersaver thermostat 59010 [ 0 Answers ]

My old thermostat had only two wires and they have 24 volts AC to them. Iconnected them to C and R terminals and the display works fine but will not start the furnace. I then used a jumper wire from C to W1 which is the furnace and as soon as the furnace kicks on the display goes blank. Is there...

I have a honeywell mercury thermostat with a red and a blue wire only... I bought a ho [ 0 Answers ]

The new thermostat has rh rc w y g for wiring options

2 wire service upgrade [ 1 Answers ]

My cousin just bought a house built 1957 has 2 wire romex plastic sheathed(hot&neutral) no ground and a breaker panel type that I have never seen before so we were talking about replaceing panel setting up grounding system for future added circuits. He wants to replace a lot of receptacles that...

View more questions Search