Ask Experts Questions for FREE Help !
Ask
    KMARBLE's Avatar
    KMARBLE Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 14, 2013, 08:21 PM
    York Diamond 80. Red light flashes 3 times, pauses then repeats. Unit will not fire.
    York Diamond 80 gas furnace.

    Will not fire.

    Red light flashes 3 times, pauses and repeats.

    Thank you for your help.

Check out some similar questions!

York diamond 80 red light on circuit board flashes 4 times. [ 2 Answers ]

York diamond 80 diagnostic code flashes 4 times [ 0 Answers ]

What started all this is my wife wanted heat. We turned on the thermostat, and the blower would not come on. The diagnostic light was flashing four times. Inside the door for the diagnostic codes it said auxillary/limit switch open. Couldn't find that so I just replaced the control board. Now...

Led flashes 4 times york diamond 80? [ 0 Answers ]

York Diamond 80 furnace Model # p3dnb16n06401a No heat - led flashes 4 times, problem start after I replaced 10u270v capacitor (motor was not running)

What does in mean when the error light on my york furnace flashes 12 times? [ 0 Answers ]

Counted numerous times to make sure its 12 times. The chart that tells you what the fault codes mean does not go up to 12, it stops at 11. I induced a twinning error to rule that out as a rapid red flash. It does this every 1-2 days. I can get it to run for that long and then it does it again. ...

I have a York gas furnace and my error light flashes 8 times. What does this mean? [ 0 Answers ]

York gas furnace LY85100B12UH11B

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.