Ask Experts Questions for FREE Help !
Ask
    AaronHassan's Avatar
    AaronHassan Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 13, 2013, 05:21 PM
    Glow Worm Unlitmate boiler not running heating
    Its getting cold again and need to start putting the heating on. Just been in the house for 2 months and the heating is a bit of a issue.

    They are storages tanks in the cupboard for the hot water the time clock has set times for the hot water but I did override for the heating and the light did lit but no heating. Normally the boiler fires up when hot water is being warmed but no luck on the heating. They are two light look switches in the airing cupboard which one goes to the big tank and the other Im not really sure.

    Please help guys

Check out some similar questions!

The back boiler from our solid fuel boiler is not heating the water in the cylinder [ 0 Answers ]

Our back boiler heats the water via the open fire. Lately the water is slow to heat in the cylinder and the pipes leading into the tank are extremely hot but the cylinder eventually heats but totally to the bottom of the tank. Would the back boiler be leaking or just full of gunge from 19 years of...

Pilot light on glow worm boiler [ 2 Answers ]

Pilot light on my glow worm domestic gas boiler goes off as soon as boiler cuts of on thermostat.I have replaced the thermocouple but it is still shuting the gas valve . What can be wrong ,the gas vavle or thermocouple.please help.

Glow Worm Betacom 30c - I just want a bath! [ 0 Answers ]

Hi there. I have recently had a new boiler fitted (Glow Worm Betacom 30c) replacing another boiler which eventually gave up the ghost. I am still having a problem with the new boiler, that I had with the old one. I am getting hot water to the downstairs of the house, but in the bathroom (which...

Heating Oil Boiler [ 1 Answers ]

How do I turn on a oil boiler to heat my house?

No pressure in heating boiler [ 3 Answers ]

One of heating pipes bursted. Replaced pipe and all is sealed. Gauge indicates no pressure temp reads 180 Disconnected pressure regulator and water comes out strong on outlet end. Have heat circulating on most of the first floor. No heat circulating to second floor. Water feed is feed,...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.