Ask Experts Questions for FREE Help !
Ask
    rabitjack's Avatar
    rabitjack Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 12, 2013, 11:52 AM
    Just change my blower motor and sequal wheel and cap and it is not blowing as hard
    I just change the blower motor and wheel and capacitor in my Colman furnace and it don't blow as hard as the old one it should because it has the same rating and rpm as the old one
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Oct 12, 2013, 06:39 PM
    Are you sure the wheel is installed so it is turning in the correct direction?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My blower motor does not stop blowing after the heat turns off, why? [ 0 Answers ]

Have an older Trane,worked fine with the Ac but now that Florida got cold and we switched to heat it doesn't shut off. Heat cycle runs and then when the heater shuts off the blower keeps blowing. Ac/heat unit all in one.

Blower motor shaft not coming off the blowing wheel [ 0 Answers ]

Ok I tried everything I put liquid wrench in the shaft bolt holder thread , tap it with a piece of wood and hammer but the shaft not budging what else is there to do do I have to replace the whole unit

Cannot pull-out the blower wheel and motor assy from a Bryant HVAC [ 13 Answers ]

The blower wheel has a larger diameter than the opening of the air chamber. The blower wheel is damaged. Something inside the unit caused four of the vanes of the blower wheel to break off and jam the motor. This is a Bryant HVAC built in 2006. Has anyone else had this problem with an internal part...

Furnace blower wheel & hosing for philip motor. Who would have parts in Alberta Canad [ 1 Answers ]

We have a Hunter Wall funance with a new moter, but we need the Blower wheel and housing. Part # 421549-03 Philips Industries. Where could we get parts. We are from Alberta, Canada Thanks Gwen

Blower motor , how do I get the basket out to change motor [ 2 Answers ]

Please help I have a 96' comfortmaker and I cannot get to the motor to change it how do I do it?

View more questions Search