Ask Experts Questions for FREE Help !
Ask
    cedust's Avatar
    cedust Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 2, 2013, 08:26 PM
    Craftsman 917287140
    How do I pull out the steering column on a 917287140? There is a plastic bushing which seems to hold it in.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Oct 12, 2013, 05:21 PM
    Hi,
    The steering shaft comes out through the bottom.
    Everything from item #21 upward must be removed with item #72 being the bolt that holds it all together. At the bottom item #64 is a clip that holds everything at the bottom and the 2 bolts, item #28should be removed. Picture is below.
    If you wish the manual, take this link:
    http://www.searspartsdirect.com/part...entId=P0804121
    And click on Download.
    Peace,
    Clarke
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do you mount a craftsman snowblade on a craftsman tractor [ 0 Answers ]

I have a craftsman 18.0 hp 42 [ 1 Answers ]

I have a craftsman 18.0 hp 42"cut mower model #$917.274391. The engine will run if the clutch/brake is engaged but when I let out on clutch the engine dies. Also if I try to engage the blade the engine dies. I replaced the drive belt but that does not seem to help. Any suggestions?

Craftsman saw? [ 1 Answers ]

Has anybody had a problem with their newly purchased Craftsman 18" saw stops in the middle of cutting? If so, is this normal? B/c we don't know if this is or it's because it runs out of gas/or oil fast. Any advice or ideas greatly appreciated. Thanks. Stops in the middle of cutting. ...

View more questions Search