Ask Experts Questions for FREE Help !
Ask
    tiny4me76's Avatar
    tiny4me76 Posts: 45, Reputation: -1
    Junior Member
    		  
    #1

    Mar 28, 2010, 03:26 PM
    Craftsman saw?
    Has anybody had a problem with their newly purchased Craftsman 18" saw stops in the middle of cutting? If so, is this normal? B/c we don't know if this is or it's because it runs out of gas/or oil fast. Any advice or ideas greatly appreciated. Thanks.

    Stops in the middle of cutting. Meaning, when you are in the cutting phase it stops during while trying to cut. In other words, does a chainsaw normally does this when you are trying to cut something or just because it's running low on gas & oil?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Mar 28, 2010, 04:05 PM

    stops in the middle of cutting?
    What does that mean? Give more specifics. Is it a self oiler?
    Have you properly adjusted the chain tension?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman weedeater [ 1 Answers ]

Craftsman weedeater running rough only 2 1/2 months old won't stay running and if it does runs rough and not up to speed. We changed gas again what can be wrong

Craftsman LT1000 [ 2 Answers ]

How do I operate the vacuum bag on the craftsman LT100 riding mower?

Craftsman Snowblower [ 2 Answers ]

Craftsman Snow blower 2 cycle engine sometimes starts with choke, Idles but with a sound like a miss fire, replaced plug no help, When it does start and choke is turned off engine seems to rev real high then stalls immediately, then won't start, also will stall immediately under Snow blower load....

Craftsman II 14 hp deck? [ 1 Answers ]

Help me please, I have an older tractor that the deck seems to be stuck in the down position... after looking at the whole system I've decided I need a drawing or diagram to see just how it is supposed to be>>>

View more questions Search