Ask Experts Questions for FREE Help !
Ask
    Cornel25's Avatar
    Cornel25 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 10, 2013, 09:16 PM
    Mainrelay 1992 honda
    Hi I want to now how can I bypass my mainrelay please let me now how to do it thanks
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Oct 11, 2013, 04:44 AM
    Why do you want to bypass it? If its flakey, replace it.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #3

    Oct 11, 2013, 06:19 AM
    Can't bypass it, it allows small current to control large current. I got a set or relay tester for most vehicles, a little over a hundred dollars.
    It plugs into where the relay does, then the relay into that. It allows testing of voltage present at relay, and if the hot and ground to control relay coil is present.
    Need to determine 4 things.
    1 Constant power at relay
    2 hot to the coil
    3 ground to the coil
    For a load out of the relay
    I would actually test out of the ignition switch, in a rush right now. Can help with the colors out of ignition later if needed.
    I'm betting Ignition switch
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #4

    Oct 11, 2013, 06:28 AM
    Can't bypass it, it allows small current to control large current. I got a set or relay testers for most vehicles, a little over a hundred dollars.
    It plugs into where the relay does, then the relay into that. It allows testing of voltage present at relay, and if the hot and ground to control relay coil is present.
    Need to determine 4 things.
    1 Constant power at relay
    2 hot to the relay coil
    3 ground to the relay coil
    For a load out of the relay
    I would actually test out of the ignition switch, in a rush right now. Can help with the colors out of ignition later if needed.
    I'm betting Ignition switch
    Go to the12volt.com
    Enter you vehicle, vehicle wiring, then scroll down to where you see the color of wires out of ignition and what they are(constant B+, Ignition, Start, Acc, etc.
    Good luck
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #5

    Oct 11, 2013, 06:43 AM
    Not possible. Why would anybody want to?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1992 honda accord lx - chevy lover in need of help with this honda [ 2 Answers ]

We just bought this 1992 honda accord lx, it drives and runs like a cadillac, we can let the car set and run all day but it won't lose a bit of coolant, but you drive it right down the road and back it pours every bit of coolant out somewhere toward the back of the engine... Im a chevy person, I...

I have a 1992 honda accord and would like to put a 1996 honda accord engine and trans [ 2 Answers ]

I got a 1992 honda accord and would like to put a 1996 honda accord engine and trans in it. Would it be possibly.

1992 Honda Accord EX [ 1 Answers ]

I've been having trouble with this one for a while now. The Check Engine Light came on at about 94000 miles, and around 96000 miles the car started idle-ing abnormally. Sometimes the RPMs would be around 0, other times it would be past 1. Around this time when I would drive it it would buck,...

1992 honda accord [ 1 Answers ]

Can anyone tell me where the main relay is and also the igniter and the coil on this car

91 civic mainrelay buzzing [ 1 Answers ]

Hi I have a 91 civic and I have replaced the main relay the dristrubitor and all its componits including the plug wires and plugs and I got another ecu out of the salvage yard and my ? Is why would the main relay buzz when the ignition is on or when trying to start the car any advise on the...

View more questions Search