Ask Experts Questions for FREE Help !
Ask
    zhensr's Avatar
    zhensr Posts: 4, Reputation: 1
    New Member
     
    #1

    Sep 29, 2013, 07:44 PM
    Weedeater rider mower lock up?
    Hi,
    I have a weedeater one riding mower. The engine rans fine but it seems the wheel locked up and the mower won't move. Last week when it happened, I had to take out the wheel key to push it back to storage. Today I was able to start the mower, and used the mower for about half hour, then it happened again. The reverse still worked, but the forward was difficult.

    Anyone knows the reason for the problem and solution? Thanks.

Check out some similar questions!

Weedeater brand mower mo#961140014.mower serges and pops [ 2 Answers ]

I just bought a new weedeater brand mower mo.number 96114414.its serges kind of like skips.I can see the linkage moving back and forth whin it should be ideling?Dose anyone know what I can do to fix this? Thanks!

Weedeater rider 262-811 not starting [ 1 Answers ]

Got an old (?) weedeater rider from a neighbor. Doesn't start. Battery charged. No sounds when turning ignition key. Lights don't come on. Can start it by shorting posts on whatever it is that some ignition wires run in to though. Sorry, don't know what it is. Replace ignition switch?

Ariens rider mower YT1138 Mower Belt Replacement [ 1 Answers ]

Hi I'm looking for info on replacing the mower belt on this unit. I have the belt, but need to know, maybe a diagram, on how to install it on the pullys. Any help greatly appreciated. How to find a manual would be great to. Thx

WeedEater Rider [ 1 Answers ]

I have a WeedEater rider, it was a hand-me-down and it works fine. However, the blades (there are two) are really dull, no, really dull . Anyway, I can't get the blades off, I propped it up in blocks and I can't get the leverage needed to get them off. Are these reversed threads? Should I be going...

WeedEater Rider stalls after 3-4 minutes [ 1 Answers ]

I have a weedeater rider with a tech engine. I spent $165.00 to get it tuned up back in May 2006. I used it about 15 times this year. Roughly 40 hours on it. The reason why I spent $165 to get it fixed was it kept on stalling after I ran it for 3 to 4 minutes. Well it's happening again. The...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.