Ask Experts Questions for FREE Help !
Ask
    mfemfemfem's Avatar
    mfemfemfem Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 28, 2013, 10:28 AM
    Ignites then goes out
    Pilot light ignites when I lite it then goes out it when I turn the furnace on.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Sep 29, 2013, 02:28 PM
    It sounds like you need a new thermocouple kit and for it to be adjusted with 3/8" of tip in flame, no more than that.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace ignites then shuts off [ 1 Answers ]

Turn temp to 70 Furnace runs until 70 degrees Maintains temperature for awhile - probably for a couple of hours At some point it stops maintaining the temperature and keeps kicking on and off. I've watched the thermostat - I'll actually turn the temp up to try to get it to kick in. The...

How much force when fuel ignites? [ 5 Answers ]

Hi, I know that when petrol ignites in the combustion chamber of a car's engine there is a force of approx 900-1200psi generated that pushes downward's onto the car's pistons. Can anyone tell me exactly how much force (in psi) is generated when diesel is ignited in a diesel car or truck's engine?

Gmp075-3 ignites then shuts down [ 1 Answers ]

I have a gmp075-3 installed 2000 I have noticed this summer the blower will come on by itself even when turn off at thermostate didn't think nothing of it thought it was just hot up in the attic but now that it is cooled off when I went to turn the heat on the burner ingnite all three then 10 to 15...

Gas furnace ignites intermittently-ignites after removing cover from ignitor chamber [ 3 Answers ]

Unit: Carrier WeatherMaker 9200 gas furnace, with an HSI ignitor Symptom 1: Thermostat is calling for heat, as evidenced by a flame icon on thermostat face, but no action in the furnace. Symptom 2: Ignites only AFTER I initiate Action 2 below. Then it seems to work for a while, until the...

Blower ignites but goes out before fan comes on [ 2 Answers ]

:mad: On a nordyne-cmf80-pg-di-n lp gas heater what is causing the blower to ignite,then turn back off before the fan system ingages??

View more questions Search