Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Main 200 amp. Installing a 200 amp sub-panel. Wire size jumper to connect(2 /100 amp)
[ 1 Answers ]
Installing a 200 amp.sub-pane (type D- Hom), the main panel is 200 amp.also, I'm using 2 /100 amp. Breakers. My question is : what wire size do I need for the jumper to connect the two breakers. I'm using #2 X3 and #4 ground wire to connect the sub-panel, do I need the same#2 for the jumper? Or...
What gauge electrical wire is required for a 200-amp circuit?
[ 1 Answers ]
The job is to install a 20,000 watt whole house generator
What size wire to use for a 200 amp service to a mobile home run of 35 ft?
[ 0 Answers ]
What wire size do I need to run about 40 feet to a mobile home with a 200 amp service?
Gauge of Wire From Meter to house,100 amp fuses,200 feet run.
[ 2 Answers ]
Hello, I am intending to replace some wire that runs for 200 feet, from my meter to my house.I live on an island, so the run is quite long ! At either end are breaker boxes with 100 amp fuses in each.Never had any trouble/ fuse blows etc. The old wire (each of the 3 strands) are a little...
What is the cable/wire gauge (product name) for installing 200 Amp Service Entrance
[ 1 Answers ]
I am installing a new service entrance to upgrade my home electrical service to 200 amps. 1 Please tell me what gage wire is required from the meter to the weather-head? The service panel with main breaker is inside the laundry room 25 feet from the outdoor meter loop. I will run the... View more questions Search
|