Ask Experts Questions for FREE Help !
Ask
    goingcrazy09's Avatar
    goingcrazy09 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 24, 2013, 10:11 PM
    Brake lights
    I have changed the bulbs ,fuses and brake stop switch in my 2000 chevey cavalier and still can't get my brake lights to work. Everything else works. Turn signals ,tail lights hazards..
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #2

    Sep 25, 2013, 03:38 AM
    Check the plug-in itself for corrosion and clean it well using some type of electra-clean, may even have to scrape the contact to clean it. Good luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Both rear brake lights out, but 3rd brake light works and bulbs are good. [ 10 Answers ]

Hello all! I have a 2005 Odyssey: The rear brake lights won't brighten when you hit the brakes, but the 3rd brake light works fine. The bulbs are good but I am not able to figure out which fuse it may be because the manual is unclear. Any ideas? Thanks Jay

No tail lights no brake lights or dash lights on a 1994 mazda b3000 [ 6 Answers ]

I own a 1994 mazda b3000 and was driving along when the dash lights went out then when I got pulled over come to find out the tail lights and brake lights don't work as well I noticed thogh the abs light flash's 12 times then pauses for a second then flash's again 12 times and so on all the fuses...

My brake lights aren't working and my brake and abs light is on in my dash [ 2 Answers ]

97 dodge ram 1500 5.9l V8 4x4

Changed 2000 camry brake light switch, but still will not shift and no brake lights [ 1 Answers ]

My sons 2000 Camry stopped shifting, no brake lights and no cruise control. I changed out the brake light switch, but it still does not work? Any ideas, please. Thanks

Tail lights and dashboard lights not workingbut brake lights work [ 4 Answers ]

I have a 95 ponitac bonneville, when I pull the switch to turn it on, the headlights only go on. My dash and tail lights will not go on. When I press the brake my dashboard lights go on. When I release the brake the ddash goes back off. Help anyone

View more questions Search