Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #21

    Sep 23, 2013, 05:58 PM
    Suggest setting selector to 1000 and take reading. Sounds like your 250 reading is the meter pegged out. Actual voltage may be higher.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #22

    Sep 23, 2013, 06:06 PM
    My power in the house is OK and at load center in the garage
    Does that mean your main load center is in the garage or does it mean you have a sub panel in the garage and the garage light some off the sub panel?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #23

    Sep 23, 2013, 06:15 PM
    Well that's solves the blowing bulb issue. It does not solve why you have 250VAC at the bulb socket. BE VERY CAREFUL with 250!! I would turn off all breakers and have a qualified person check this out. Very abnormal. Could be lightning damage and one of the bars shorted to another side? Burned out neutral at garage panel?
    mikeguyon's Avatar
    mikeguyon Posts: 14, Reputation: 1
    New Member
    		  
    #24

    Sep 23, 2013, 06:17 PM
    When I set the voltage selector to 1000 I get a reading of about 60 volts
    mikeguyon's Avatar
    mikeguyon Posts: 14, Reputation: 1
    New Member
    		  
    #25

    Sep 23, 2013, 06:19 PM
    ma0641 I think your right that's what I'm going to do.

    Thanks to everyone

    mikeguyon
    jessicae03's Avatar
    jessicae03 Posts: 2, Reputation: 0
    New Member
    		  
    #26

    Oct 21, 2013, 08:49 PM
    I think the pdf attached shows the installation manual and it may got the configuration of the right bulb to be used for garage . If it doesn't work why don't you call a garage storage system service professional so that he could fix it for sure.
    Attached Images
  1. File Type: pdf 114A3083.pdf (2.01 MB, 136 views)
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changing lights in garage [ 1 Answers ]

From the ceiling only 3 wires -- white, black, and bare ground From the new fluorescent light ballast white, black, bare and red What to do with the red?

Why is my ceiling fan lights blinking, when I turn on my lights. [ 2 Answers ]

My ceiling fan lights blink when I turn on my ceiling fan light... It does this when the fan is on or off... I have fluorescent lights the energy kind in my ceiling fan. My fans are 2 yrs old... And they are Harbor Breeze kind..

5 lights in my garage [ 3 Answers ]

I have 5 lights in my garage, I just changed two of the lights bulbs that were blown and replaced them with two new bulbs. Now the lights are dim and after about 5 seconds it is triggering the circuit breaker and killing all power to the garage and restroom on that circuit. It seems power is...

Exterior garage lights [ 1 Answers ]

"Hello, I want to have 2 exterior garage lights controlled by the garage door opener(GDO)so that the exterior lights come on when the GDO light comes on. But, I would also want the same 2 exterior lights controlled by a wall switch independently from the GDO. Thanks"

Wondering why my lights keep blowing out [ 2 Answers ]

I have been fighting with my husband because he said that their isn't a reason why my light bulbs keep blowing out. Meanwhile the dining room, living room and den which isn't on the same line keep blowing out. My worries is if this could cause any fires. Please give me some suggestions that I...

View more questions Search