Ask Experts Questions for FREE Help !
Ask
    mlbazzle's Avatar
    mlbazzle Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 4, 2007, 02:46 PM
    How to rehook solenoid on Murray Lawnmower
    I have a Murray Riding Lawn Mower. It was given to me and it won't start. They replaced solenoid and wanted to make sure how it is supposed to be hooked up. The model # is 52100x92a
    newaukumdon's Avatar
    newaukumdon Posts: 525, Reputation: 44
    Senior Member
    		  
    #2

    Apr 4, 2007, 11:44 PM
    A solenoid is just a switch, an electromagnetic switch and will work either way. You connect starter wire to one of the large posts and the battery lead to the other large post. There should be a small connection on the side and the hot wire from the ignition goes there. When ignition is turned to "start" it energizes the switch with 12-V and the two posts are internaly connected.

    Don
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Murray push lawnmower [ 1 Answers ]

I have a Murray push lawnmower that I want to know the year of manufacture. Model 21673X92A Date Mfg 1283 It has a Tecumseh engine TVXL115 56025A Many thanks.

Murray riding lawnmower [ 4 Answers ]

I need help putting on the belt. Is there a diagram - as I have lost my book -

Solenoid trouble for murray riding lawn mower [ 1 Answers ]

I have a murray riding lawn mower and for some reason the solenoid keeps going bad. I maybe get one or two mowing jobs done before I have to replace it. Does anyone know what could be causing this? Thanks Kim

NEED HELP Replacing engine stop/control cable on Murray Lawnmower [ 1 Answers ]

THe cable broke on the inside and I can't figure out how to take off the end that hooks onto the lawn mower, because it's a weird squared off round connector that seems to require some special tool to take it off or something Here is a pic of something kind of similar although it doesn't have...

Solenoid [ 2 Answers ]

Can anyone tell me how to test the soleniod for the reversing valve on a heat pump? :confused:

View more questions Search