Ask Experts Questions for FREE Help !
Ask
    dairycon's Avatar
    dairycon Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 13, 2013, 07:25 AM
    Broken pipe
    The shower head pipe broke off at the fitting in the wall. Is there a way to get that broken piece out without tearing the wall apart?
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
     
    #2

    Sep 13, 2013, 08:58 AM
    If you are a plumber and have enough of the right tools... maybe. Why did it break off? That would give an indication as how likely it can be done or not.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #3

    Sep 13, 2013, 09:54 AM
    Easiest way is with 1/2" internal pipe wrench. About $10.
    Attached Images
     
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #4

    Sep 13, 2013, 11:05 AM
    I've never been successful at removing the thin walled threads of a shower arm using that tool, Harold, but it is a cheap tool and certainly can't hurt to try it!

    Instead, I make a couple small cuts in the threads (not too deep) using a mini. Hacksaw blade and then use a sharp tipped AWL and hammer and undermine the threads of the remaining pipe threads and then pull the threaded part out.

    Tricky work, but if Dairycon is careful and doesn't damage the threads of the fitting in the wall, the broken off threads can be removed!

    Mark
    Attached Images
     

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Removing broken pipe threading from inside another pipe [ 11 Answers ]

While trying to unscrew the shower flange (the pipe that comes out of the wall that you attach the shower head to) from the pipe in the wall, the flange broke at the threading that goes into the pipe in the wall, so the threading from the flange is inside the pipe in the wall. We were told to use...

Broken Pipe [ 1 Answers ]

Broken is outside my house would hurt to keep main water coming my home tonight even if the weather outside is cold

Broken well pipe [ 0 Answers ]

I have a 40 ft well. I was pulling up the pipe to clean and the pipe broke off and went back into the ground the outside pipe is 2 inches the inside pipe is 1 inch. Pvc any idea how to get the 1 inch pipe out.

Broken Pipe [ 9 Answers ]

I had a pipe break off in the female part, How do I get the threaded part of the pipe that is still there off? I have aleadt tried a internal wrench and that does not seem to work at all.

Broken pipe? [ 2 Answers ]

Hi, I'm having some problems with my hall bathroom. The toilet backs up, the sinks don't drain right and they back up the toilet. I had a plumber come out and he ran a snake down toilet, took off toilet and ran snake and got on roof to run snake down plumbing vent. This did not fix the...


View more questions Search