 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Toilet will no longer flush properly
Installed a toilet in the basement and it worked fine for about two weeks. Now toilet will not flush properly. I took off the Studor vent, and it worked fine, but instead of pulling air in the vent pipe, it was blowing it out. Toilets upstairs work fine.
|
||||
Check out some similar questions!
When I flush the toilet the bowl fills up with water and goes down really slow and it doesn't flush everything down. Then it doesn't fill all the way back up with water? We live on the bottom floor of a apartment complex and also we have major sewer lines being replaced What do I do?
One toilet works fine and the other gurgles and tries to over flow. Why?
When we started using the upstairs toilet, the up and down toilets will not flush correctly. They flush sometimes when we hold down the handle. I have made the recommended adjustments in the tank, cleaned the holes around the rim, and the siphon hole. When I pour a bucket of water in the bowl, it...
My toilet will not flush properly. I have plugged and snaked. I have pulled the toilet and snaked it from both ends as well as the main drain. I have no other problems on this drain, showers, sinks and another toilet! What am I missing? Jim
Long story, but here goes... I had plumbers in because my toilet was leaking water onto my basement ceiling. They replaced the seal on the toilet and immediately afterwards it wouldn't flush properly.. filled with water, about 3/4 of the way in the bowl and water gushed up out of my sink drain...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
