 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a Craftsman 917.272751 Briggs 18 OHV Intek Plus. I have it for 10 years with no problems. This year I got 2 weekend grass cuttings in until the third cutting I was 45 minutes into the 2 hour event when the tractor sputtered, ran, sputtered, ran, sputtered, like some one took the fuel line...
The idler (PTO) for the deck will not fully disinguage so the safety switch is not made so the tractor will not start once it is shut off. I cannot see why it is hanging up. If I reach under the tractor and pull on the deck belt strongly ( engine shut off) it will release, but it is...
Clutch pedal not working properly. Right when it happened, I noticed a 5" spring on the ground. According to my user's manual , I suspect it is key no. 55, part no. 105709X, clutch return spring.. My reason: when I put my boot BEHIND the pedal & pull it towards me, the drive engages and off...
Is there a drive pin in the drive shaft of this mower
I was just given a lawn tractor- the previous owner says the drive starter is shot. Is this a common problem and how do I replace it?
View more questions Search
|
