Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Trane xe80 control board failure replacement
[ 0 Answers ]
I have just replaced my TRANE XE 80 control board and the fan comes on immediately and the LED blinks 5 times. I have checked all the rollout sensors and the fan and blower sensors and they are good. I have jumped all the sensors out at the control board and still get the same result. I have...
Trane xe80 internal control board failure, red light on steady
[ 1 Answers ]
Trane xe80 internal control board failure, red light on steady
Location trane xe80 internal control
[ 1 Answers ]
Location of internal control trane xe80
Trane xe80 internal control board failure, red light on steady
[ 0 Answers ]
My furnace runs for a while then the flame goes out but the blower keeps running. Control board has solid red light that means internal control board failure (replace)I turn off the power to the unit and then turn back on, it runs for a while then repeats. Seems to get worse the colder it is outside
Trane XE80 Control Board / Booster Fan Questions
[ 4 Answers ]
The blower on my parents Trane XE80 gas furnace stopped working this weekend and a local HVAC company diagnosed the problem as a bad control board. The technician didn't have a board on his truck so he temporarily bypassed the control board and wired the fan to stay on 100% of the time until he... View more questions Search
|