 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Problems with my harbor breeze calling fan.
We had a power outage and when the power was restored The celling fan does not work. We changed the dip stick settings so that they match. Checked the wiring which is fine. Tried the pull chains with no response. Checked circuit breaker which is fine. LED on remote lights up. Any suggestion. If it's a receiver how much do they cost and where can I get one?
|
||||
Check out some similar questions!
I recently bought a Harbor Breeze, 52 in Triton Ceiling fan, Model 192900. I installed it with the instuctions. Everything was well until the light started to give a strobe effect and the fan makes a groaning sound only on the 1 and 2 settings. The only way to turn off the strobe effect is by...
I bought a harbor Breeze ceiling fan with 5 lights a couple years ago installed it had no problems until now, the first problem was after putting in a new light bulb the bulb would only stay lit if you held it a certain way, but if you let go it wouldn't stay lit.Now I had a light bulb bust in...
I have a 52 inch harbor breeze ceiling fan I installed a little over a month ago. It calls for four 60 watt Candelabra Base bulbs which I installed. The problem is the frequency of bulbs blowing out. Even without using the fan. I have tried reducing the wattage bulb used down to 40 and I still have...
I have a 2 year old harbor breeze ceiling fan w/remote and in the past few days it isn't working properly. If you use the remote to turn the fan on high, it will run great for about five minutes and then just quit. The light will not even come on. If I give it a minute of two and flip the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
