Ask Experts Questions for FREE Help !
Ask
    Gadgetman64's Avatar
    Gadgetman64 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Jul 20, 2013, 09:14 AM
    Pumptrol pressure switch adjustment
    I am having problems with the Chlorinator not sending chlorine to the house. My unidose pump is working find its about 16 years old but I have been servicing it yearly with new parts and the water softener is working find. I can see the chlorine coming through the tube from the pump but I am only getting one cut off/in pump at a time from the pumptrol pressure switch. Is this the way the pump should be working? Or do I need to replace it? I need fast help because I am getting a lots of iron in the water in the house.

    Thanks,Gadgetman64
    Gadgetman64's Avatar
    Gadgetman64 Posts: 4, Reputation: 1
    New Member
    		  
    #2

    Jul 20, 2013, 09:16 AM
    I am having problems with the Chlorinator not sending chlorine to the house. My unidose pump is working find its about 16 years old but I have been servicing it yearly with new parts and the water softener is working find. I can see the chlorine coming through the tube from the pump but I am only getting one cut off/in pump at a time from the pumptrol pressure switch. Is this the way the pump should be working? Or do I need to replace it? I need fast help because I am getting a lots of iron in the water in the house.

    Thanks,Gadgetman64
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pumptrol Pressure Regulator adjustment [ 12 Answers ]

How do I adjust the pressure regulator on a Pumptrol to increase the amount of pressure?

Pumptrol pressure switch [ 2 Answers ]

How to adjust a water pump pressure switch/regulator?

Pumptrol pressure switch [ 0 Answers ]

The switch doesn't shut off. It flickersback and forth. Sometimes it shuts off sometimes it keeps on running. Its like it is trying to make up its mind but doesn't know

Pumptrol Pressure Regulator adjustment [ 5 Answers ]

Actually, the smaller control sets the differential amount between the low and high cutoffs, that is usually a 20lb difference, such as 30lbs "turn on" to 50lbs "turn off" (the default factory settings), or 40-60, or 45-65, etc. and you really should not mess with it. Just adjust the longer...

Pumptrol pressure switch [ 1 Answers ]

I have a fsg2 square d well pump switch. If I want to get the max pressure, can I do it by adjusting one of the screws only? Charles

View more questions Search