Ask Experts Questions for FREE Help !
Ask
    terrys37's Avatar
    terrys37 Posts: 2, Reputation: 1
    New Member
     
    #1

    Mar 31, 2007, 05:58 PM
    5hp Lawnmaster mower
    Can anyone help me with this, my mower has hit something in long grass, and now when I mow the lawn it goes for a bit then stops. It does not run at full revs anymore and stalls in long grass and stops once it gets hot.
    newaukumdon's Avatar
    newaukumdon Posts: 525, Reputation: 44
    Senior Member
     
    #2

    Apr 1, 2007, 12:38 AM
    Did you tip the mower up to clear what you hit or to clean out grass? Sometimess in the early spring we have to tip mowers and when that happens oil can get into air filter and not let the engine rev up. Remove air filter and run for diagnostics.

    More commonly when an object is hit with a walk behind the flywheel key is sheared, this is the part that keeps the ignition in time with the piston. If it does shear they almost never restart but could cause the scenario mentioned.

    Don
    terrys37's Avatar
    terrys37 Posts: 2, Reputation: 1
    New Member
     
    #3

    Apr 1, 2007, 03:09 PM
    Quote Originally Posted by newaukumdon
    Did you tip the mower up to clear what you hit or to clean out grass? Sometimess in the early spring we have to tip mowers and when that happens oil can get into air filter and not let the engine rev up. Remove air filter and run for diagnostics.

    More commonly when an object is hit with a walk behind the flywheel key is sheared, this is the part that keeps the ignition in time with the piston. If it does shear they almost never restart but could cause the scenario mentioned.

    don
    Thank you for your reply. It was my step dad that was mowing at the time. So does that mean I have to take the flywheel off and see if the keyways are broken then.and if so replace them and sit the flywheel back in the right position
    newaukumdon's Avatar
    newaukumdon Posts: 525, Reputation: 44
    Senior Member
     
    #4

    Apr 1, 2007, 06:15 PM
    The flywheel has one key and it will only go in one way, I would check the air filter first.

    Don

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lawnboy 6.5hp mower engine fluctuates [ 7 Answers ]

Hi, I have a lawnboy proline lawnmower 6.5hp and a few seconds after starting the mower, the engine goes up and down and I am doing nothing to it. My friend just gave it to me for free as he was moving and he said it did this but still works. Is this a serious problem? Will it get worse? What...

Mtd yardman 16.5hp mower will not start [ 41 Answers ]

I just brought home a used, but in very good shape, MTD yardman mower. It has the 16.5 hp Briggs mower with the 7-speed shift on the go tranny. It also is the industrial/commercial model. For some reason, the thing will not crank. The engine will spin and gas will go to the carb, but it acts...

MTD 5.5HP Chipper/Shredder [ 25 Answers ]

I have the mentioned unit and I can't get it to turn over. It has a pull string starter and it doesn't seem to generate a spark. Should I check the plugs. I don't use it much and did not drain it for storage. But I have a lot of debris from branches that came doen in a storm so I really need it. ...

5hp MTD FRTine Tiller [ 1 Answers ]

My tiller runs fine for five to ten minutes then dies.:confused:


View more questions Search