Ask Experts Questions for FREE Help !
Ask
    delta spout's Avatar
    delta spout Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 4, 2013, 04:18 AM
    How to tighten loose spout on sink
    High rise spout on kitchen sink becomes loose when spout is swiveled from one sink to the other. The spout becomes so loose that it starts to separate from the sink.
    Repeated attempts to tighten the plate and screw assemble from below have not been successful. No other items were provided to secure the individual spout.
    What to so?
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
    		  
    #2

    Jul 4, 2013, 08:56 AM
    Can you tell us what the name and model of faucet? This will help us help you.

    Chuck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Screw won't tighten on tub spout [ 1 Answers ]

Replacing a tub spout and the screw tightens while off the pipe but won't tighten once spout is placed over pipe - this is a non-threaded pipe with a spout that has the one screw (allen wrench)

How to tighten loose chair legs [ 5 Answers ]

I have a vintage (not sure if it qualifies as antique yet) Duncan Phyfe diningroom set I inherited from my mom. It was in pretty bad shape when I got it. I found an older gentleman who knew how to restore it. It looked beautiful when it was finished but now after a few years, all the chair legs are...

Tighten wobbly spout on garden tub [ 0 Answers ]

Does not leak but is not secure to deck. Delta brand

One handle faucet is loose, how do I tighten it? [ 1 Answers ]

I have a one handle Moen faucet and the handle slowly falls down when you turn it on. How do I tighten this?

Toilet Floor Flange Screws loose and will not tighten [ 1 Answers ]

I had a leaking toilet wax seal. Pulled the toilet off cleaned all old wax. I noticed while cleaning wax off that two of the screws securing the floor flange to the subfloor (vinyl covering over a wood substrate) were loose and will not tighten up. I was told that perhaps the when they roughed it...

View more questions Search