Ask Experts Questions for FREE Help !
Ask
    hommerson's Avatar
    hommerson Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 6, 2009, 01:58 PM
    One handle faucet is loose, how do I tighten it?
    I have a one handle Moen faucet and the handle slowly falls down when you turn it on. How do I tighten this?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Feb 6, 2009, 04:18 PM
    Check the picture out below.

    You will need to remove parts 3 (plastic cap) and 2 (allen screw) and then work your way down to the cartridge as needed. See if anything has chipped or broken off inside the unit.

    If it has, call 1800buymoen and request a new part under warranty if faucet is not too old. You may need to visit the website to get the part number www.moen.com Otherwise, a local plumbing supply house can order the part for you more quickly!

    If nothing obvious you may need to replace the entire cartridge assembly (part #13).

    Let me know what you discover...

    MARK
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Loose faucet handle [ 12 Answers ]

We just installed a new Price Fister faucet in our kitchen sink. The lever that turns the water on doesn't stay up unless you hold it (up is on, down is off). We can't lift the handle halfway to get only a little water because the handle falls to the off position immediately. Is there a screw to...

Loose single faucet handle [ 3 Answers ]

I have a Moen Kitchen faucet that is about 4 years old. Recently, I've noticed when turning on the water by pulling up on the single handle the whole long necked spout lifts and wiggles tremendously. Someone told me to pop out the logo on the faucet and tighten with an allen wrench but that did...

Loose one handle faucet on kitchen sink [ 6 Answers ]

How would I fix my kitchen faucet it is very loose on the sink - still works fine - but I know this can't be good for it. It is a one handle with spray diverter. It didn't just gradually get loose - just one day it was like that. I need something like 'anatomy of a faucet' - as I have no clue...

Loose Kitchen Faucet handle [ 4 Answers ]

Hi, I have a single handle kitchen faucet which when I turn on the water, it's loose to the point where sometimes gravity will pull the handle back down into the off position. The securing screw is tight and does not wiggle. The whole mechanism seems fine except for its resistance to stay on....

View more questions Search