Ask Experts Questions for FREE Help !
Ask
    vafalalani's Avatar
    vafalalani Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 3, 2013, 01:07 PM
    Water heater state
    Hi,
    I have the water heater electric state 9 mount ago the lower element came bern I relapse that after 5 mounts aging Bern and that time
    I change both element and thermostat but after 3 mount aging element come Bern ,what can I do ,any body can help my why? Also the both element are right W the lower is 4500w and the upper 3500w

    Actually in water heater boy type also for upper 4500w I don't know this is resin ,but must of the time the lower comes Bern,

    Thanks
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jul 3, 2013, 01:34 PM
    Please reread your post and try to present it in a more readable state. It sounds like you are asking about burned elements. What is "resin"- resistance? 4500 watts is power, not resistance.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #3

    Jul 4, 2013, 12:06 AM
    Here's a manual: https://dl.dropboxusercontent.com/u/...ter_heater.pdf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

State select hot water heater pilot light goes off after heating one tank of water [ 1 Answers ]

Water heater pilot light goes off after heating one tank of water and has to be relite again.

State select electric water heater not heating water as well. [ 2 Answers ]

My water heater has recently started acting up. It does not heat like it use to. It only heats about half the water it usually does. I never have a problem with it turning off or the high temp switch never has to be reset. It is about 6 years old and have never had a problem with it before. I...

State Select Water Heater - Hot water not consistent [ 7 Answers ]

The water heater supplies hot water when first taking a shower, but the water cools significantly, and by the end of the 4 minute shower the water is barely warm. It didn't used to be this way, it used to supply hot water the entire time. What would cause this?

State Gas Water Heater- md# gs650ybrt -. Heater won't stay lit. [ 1 Answers ]

Statye gas water heater model gs650ybrt. Heater won't stay lit

State select water heater leaving residue in water [ 2 Answers ]

We have a state select water heater, model pr650novet. We have flushed it several times but we still have black residue ending up in all our tubs. Does anyone know what else we could do?

View more questions Search