Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replaced diverter stem but bathtub faucet still runs water when I turn on shower
[ 5 Answers ]
When I turn on my shower my bathtub faucet runs a good amount of water from it. So I replaced my diverter stem brand new as well as beveled washer as that is what the old one had. It worked great for a day, but when I went to shower this morning I had the same problem. When I turned on my shower...
No Water when I turn on bathtub/shower faucet
[ 7 Answers ]
I have not used the tub/shower faucet in some time. Today when I went to turn on the faucet, no water comes out. Help
Water shut off valve (interior.toilet, faucet, etc.)
[ 11 Answers ]
Needed to change some tank parts for my toilet... Wanted to shut water off from valve... turned knob, and it broke off. (luckily no water leak) I have what I believe is called a compression valve. Old type, probably 4 or 5 turns to shut off water. I will replace with newer 1/4 turn...
Bathtub faucet valve - hot water
[ 1 Answers ]
This morning I have noticed this problem with the bathtub faucet valve. When I turn the valve anti-clockwise from 5 O clock position cold water runs at normal pressure until the valve reaches 12 O colck position. This is usual but when I continue to turn the valve to get hot water the pressure...
Faucet shoots out water eradically
[ 1 Answers ]
When I turn my faucet on (hot water) it eradically shoots out water like stop and go. There isn't a steady stream of water. It seems like there are air pockets in the pressure or something. Any ideas on how to fix this? View more questions Search
|