Not your question?
  Ask your question
  View similar questions
   
  
 Check out some similar questions!
How do I check combustion fan. Two wires from top to power and two wires from bottom
 [ 2 Answers ]
 I replaced the big fan motor an capacitor and it just hums when I turn switch to on . I can hot wire it and it runs fine. I want to check the little cobustion fan but it has four wires two for power and two for a sensor on the ventilation fan? 
Why transformers has 3 wires input and 2 wires output? 220-24v
 [ 2 Answers ]
 I'm trying to connect transformer to my ac unit but the confusion is the side for 220v comes with 3 wires, how can I connect the transformer? 1 it COM The other 2 wires 208v- 240v, my unit is 220v and I'm trying to figure how to connect the power to this transformer. 
Three white wires & three black wires to dimmer switch with 2 black wires - Help!
 [ 2 Answers ]
 I'm installing a new dimmer switch and when I removed the old on/off switch, I found 3 white cables all tied together and 3 black cables. I know that the cables also connected to the light switch in the guest room. I just don't know what to do with my 2 black wires from my new dimmer switch, and... 
Wires came loose while changing switch need to get wires matched.keeps blowing fuse
 [ 2 Answers ]
 
My question is to match the right color wires to operate ceiling fan and light fixture. The wires came loose before I could match them. The swith has three colors black, red and blue. The colors that are to be matched with are green, red and orange. How do I match these. Additionally it has a... View more questions Search 
  |