Ask Experts Questions for FREE Help !
Ask
    ironworks's Avatar
    ironworks Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 10, 2013, 06:03 PM
    208 single phase
    Hello,

    I have just purchased a plasma cutter and it requires 208/230volt single phase. I only have 240 volt power in my shop.

    Any way to make this work or do I have to get a different plasma cutter for 240 volt.

    Thank you
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
     
    #2

    Jun 10, 2013, 06:08 PM
    You use both hots from the 220... without the common... you will be somewhat over the 208volt needed... but it will work and be single phase. I wired in a 208 volt 3.5 hp air compressor that way... and the one in our office has been for over 30 years as well...
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #3

    Jun 10, 2013, 06:58 PM
    Actually it's both hots from your 240V panel, without a neutral.

    Your 230V cutter will work fine @ 240V.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can you get single phase 208(2 legs) from 3phase4wire120/208 panel [ 2 Answers ]

I have an air compressor rated 230/460. I only have available 3phase 4 wire 120/208. Can I use a 2 pole breaker and get 208, and then use a boost transformer to reach 230, or will the compressor operate effeceintly enough with 208 using the 5% rule for operating voltages?

208 single phase [ 3 Answers ]

Hi, I recently purchased a booster Heater for our church camp dishwasher. It came with 208/ 3ph connections and said it could be field converted to 208 single phase. I checked the voltage at the panel and it read 140+ volts. Is this a problem?

Difference between 3-phase 208 V and single phase 208 V wiring? [ 2 Answers ]

What's the difference between a single phase and a three phase 208V wiring? Does the first has 2 wire only? Can you also identify the wires as to hot, neutral, and ground? This wiring applies to installing an Air conditioning unit. Thanks.

208 single phase vs 208 3 phase [ 5 Answers ]

How can you have the same 208 voltage at 2 pole single phase And 208 voltage 3 phase, when there is an additional (3rd) wire. Please help.:confused:

208 volt3 phase why to single phase 120 volt [ 4 Answers ]

Supply is from 75 kva transformer, 3 phase delta /y three wire feeding a 30 amp breaker. 100 feet down stream is a junction box that I want to tap and produce a 120 v single phase ( 20 amp CB) supply. The junction box feeds a 6 amp motor


View more questions Search