 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Murray lawnmower electrical problem starter wire hot
Murray riding lawnmower. Changed drive belt. Worked fine. Cut grass running for about half an hour. Then mower started failing like out of gas. But gas was fine. Turned off and tried to stqrt but starter was lazy. Then red wire from solenoid to starter heated up with a bit of smoke. Now nothing electrical works.
|
||||
Check out some similar questions!
I have a murray riding lawnmower model 42828x8A when I set to engage to travel he sounds like it is not engaging fully and will not move without me helping it. It will however go in reverse and travel.
I was given a Murray Riding Mower that had nothing when the key was turned . I replaced the blade disengage safety switch and the mower started. I get nothing again when the key is turned. I replaced the cellenoid, battery, BDS switch again, and had the starter checked. The seat safety was...
Does anyone know how I can find out what the code is for wiring a hot tub in Reno, Nevada? I have an electrician taking advantage of the fact I don't know this stuff & I really need help.
My mower runs but only as long as the battery has a charge. And then it dies, so what could be the problem? Please help I have a huge lawn and a push mower just doesn't get it!!
Ihave an older Troy-Bilt riding lawnmower that stopped running for no apparent reason. When we checked the battery it was dead and couldn't be charged. Got a new battery and the lawnmower started and ran for awhile (couple of days) then would not start and the same story again. Took it to...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
