Ask Experts Questions for FREE Help !
Ask
    pecarrera's Avatar
    pecarrera Posts: 1, Reputation: 1
    New Member
     
    #1

    May 9, 2012, 03:02 PM
    have a problem with my murray riding lawnmower
    I have a murray riding lawnmower model 42828x8A when I set to engage to travel he sounds like it is not engaging fully and will not move without me helping it. It will however go in reverse and travel.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    May 9, 2012, 03:12 PM
    Could be your tension adjustment needs to be tightened on the belt between the transmission and the engine pulley. Have someone operate the cltch/brake and watch how the rods and pulleys move. You should see the tensioner pulley press on the belt, the arm that pulley is mounted on is adjustable.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #3

    Jun 26, 2012, 03:45 PM
    Hi,
    A worn belt, bad idle or shift-on-the-go out of adjustment. Parts breakdown at:http://www.outdoordistributors.com/p...PARTS-LIST.pdf
    Peace,
    Clarke

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Riding lawnmower murray [ 2 Answers ]

When I turn the key the engine turn but won't start and fire comes out the muffle can you help me

Murray Riding Lawnmower [ 1 Answers ]

I have a Murray Riding Lawnmower. I can not get it to go into Reverse. Can the transmittion be repaired. Sally

About murray riding lawnmower [ 5 Answers ]

How do I test the safety switch or bypass it to see if that is what it is.Why would it crank while sitting on it ,but know matter what gear it is in(even neutral) it cuts off ,but if you push in clutch/brake quickly it will stay cranked ?

Murray Riding Lawnmower [ 3 Answers ]

My Question is That my Lawnmower will crank but when you release the clutch/brake it dies! Why would it do this?

Murray riding lawnmower [ 4 Answers ]

I need help putting on the belt. Is there a diagram - as I have lost my book -


View more questions Search