Ask Experts Questions for FREE Help !
Ask
    shailendrabaich's Avatar
    shailendrabaich Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 5, 2013, 05:35 AM
    Can a normal water pump be used in a hot water system?
    I need to install a pump on my hot water system and I was wondering what type of pump I need to install
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Jun 5, 2013, 09:42 AM
    Use a circulating pump. Connects to home water system, some at the farthest faucet, others at the hot water heater. Remember, you will spend more money keeping the water hot so good pipe insulation is important. .
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #3

    Jun 5, 2013, 10:20 AM
    I need to install a pump on my hot water system
    Ma0641 thinks you wish to circulate hot water to your farthest fixture while I think you want a booster pump to increase the pressure. You decide! Back to you, Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Two hot water tank system but will have no hot water but water has not been run? [ 1 Answers ]

We have a two hot water tank system and occasionally there will be no hot water. This seems to occur when the water has not been running for a while (like in the evening or first thing in the AM). The pilot light is on in both tanks and the burners are lit? Any idea why we don't have hot water...

No hot water coming from hot water tap after installing new shower pump [ 4 Answers ]

Hello I installed a new shower pump today. After completing the installation and turning the water back on, there is no water running from any hot water tap in the house. Do you think I have an airlock? Any other possibilities? I have tried to get rid of the airlock with the 'length of hose'...

Can a hot water circulation pump causing whining noises in the plumbing system? [ 1 Answers ]

I recently installed a hot water circulation pump and now get occasional whininf noise in the pipes, usually when flushing the toilets. There is also a expansion tank on the system and I have PEX supply lines.

Hot water only - no cold water - soft water system [ 4 Answers ]

I have what seems like a very odd problem. I have lost water pressure to all sinks, one shower (other works fine), and the backyard hose (frontyard hose works fine). I'm very confused, but initially had a problem where some tiny gold pellets of some sort had backed up into places where we were...


View more questions Search