Ask Experts Questions for FREE Help !
Ask
    jamlove's Avatar
    jamlove Posts: 78, Reputation: 2
    Junior Member
    		  
    #1

    Jul 20, 2005, 10:40 AM
    P-Trap angle configuration
    Guys,

    Does it matter how much the outlet trap arm is turned on a P-trap? I have a tight situation with the installation of my clothes washer drain (in-wall). I'm wondering if I can turn it in the way shown in my diagram, (3).

    I know I've seen (2) before, just wondering if there was some rule saying how far you could turn the arm.

    The diagram (attached) is top-views of a P-trap, with the inlet on top.
    Attached Images
     
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
    		  
    #2

    Jul 20, 2005, 10:46 AM
    I wouldn't think so. Waste doesn't remember which way it was going before it turned down. If Tom says different, go with what he says.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Jul 22, 2005, 07:19 AM
    Once more
    Quote Originally Posted by labman
    I wouldn't think so. Waste doesn't remember which way it was going before it turned down. If Tom says different, go with what he says.
    Labman rides into the rescue. He's 100% correct. Position it where you will. Good luck, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Wireless Zero Configuration Problem [ 9 Answers ]

Hi Folks, I have just reformatted my daughters PC with windows xp pro but can't seem to solve this issue: The PC is connnected to the internet via a wireless adapter which is fairly new and I have had no problems with it before the reformat. To get the computer to access the internet I...

Tc tuner configuration [ 1 Answers ]

Dear Sir; I have d845ewgew intel desktop board and 1.2 GHz inel processor I have installed TV tuner I only heard voice but cant'nt seen image I live in pakistan so I configure them to pakistan and in vga card I configure them as a vga card please solve my problem. ...

Wired router configuration [ 4 Answers ]

Hi, I have a PC running XP Pro and I am using a Network Everywhere Cable/DSL 4 port router (NR041). It is configured and I have only one problem. I use a bittorrent client, which to make a long story short, allows me to download and upload files (music, movies, etc.) If my router is not configured...

DWV Configuration Question [ 6 Answers ]

Good day all, I hope somebody can offer a quick piece of advice. I had my very first plumbing inspection this morning, and the inspector told me I'd have a problem venting two basement fixtures with the configuration I had. I'm attaching drawings to illustrate. So, he said with what I have...

Mandrake 10 modem configuration [ 17 Answers ]

Hi team I'm new to this board so you will have to bare with me if I make a few mistakes . My Q I'm on dial up. And I have mandrake 9.1 and 10. And they will find all hardware drivers but the modem driver. I understand this applys to all linux products when you use dial up.

View more questions Search