Ask Experts Questions for FREE Help !
Ask
    jimnocero's Avatar
    jimnocero Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 14, 2013, 10:17 AM
    I have a Scotts 18 HP/46 Inch Tractor. I need spindle bearings. (Model 42562X8)
    I need to replace the bearings on one of my deck jackshafts. (Model 46562X8)
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    May 14, 2013, 10:51 AM
    Take an old bearing oto a bearing supply house... they can measure them up and get you a replacement. (look them up in the yellow pages.)

    Things like that are off the shelf items and not unique to your manufacturer.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #3

    May 16, 2013, 03:13 PM
    Hi,
    I would probably go with the whole housing assembly to eliminate the possibility of wear to the spacer that is between the bearings. Part #492574.
    Did not notice it at first but your headline says it is 42" and further down you say 46"
    Here is a breakdown of the 46" machine:
    http://www.outdoordistributors.com/p...PARTS-LIST.pdf
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I need a wiring diagram for a Scotts lawn tractor model s1642 [ 8 Answers ]

I own a Scotts lawn tractor model 1642 that won't start (turn over). The battery is good and I've replaced the solenoid. I believe its one of the many safety interlocks that's the cause.

Scotts Lawn Tractor (mfg by John Deere) Model L1742 schematic [ 2 Answers ]

I am looking for a wiring diagram (schmatic) for a Scotts Lawn Tractor Model L1742. The unit will not start and appears to have a sefety switch open. The battery is good and I have checked all items suggested by owner's manual. If I can come up with a schematic I can possibly troubleshoot and...

Diagram for drive belt for a scotts lawn tractor model s2554 [ 1 Answers ]

I would like a diagram for a drive belt for a scotts lawn tractor model s2554. Some one else took it off and I can not get it back on.

MTD Model 820 Lawn Tractor twin cylinder 46 Inch Deck [ 1 Answers ]

Was cutting the grass and the engine stopped. Tried to restart but cannot. The battery is fine, the oil was just changed, the gas is clean and fresh, the carburetor is clean, the air filter is clean, the choke works fine, the spark plugs are clean and dry. The enine turns but won't fire up.

Is there a clutch adjustment for a Lawn Chief 42 inch lawn tractor Model 13AG678G022 [ 1 Answers ]

Clutch adjustment

View more questions Search