Ask Experts Questions for FREE Help !
Ask
    jjeverman's Avatar
    jjeverman Posts: 1, Reputation: 1
    New Member
     
    #1

    May 9, 2013, 11:46 AM
    Wiring thermostat at the furnace end
    Recently installed a Honeywell Thermostat. Heat has worked great. Now that it is warming up Itried to fire up the a/c or the fan and they won't turn on. I believe I may have messed up the wiring at the furnace end of things. Getting hot, please help:) My furnace is a Carrier. I believe it had a jumper between to terminals when I was installing thermostat earlier in year. Now it doesn't. Does anyone know what wires go where?

Check out some similar questions!

Need help wiring my thermostat to furnace. [ 0 Answers ]

I removed the 4 wires from my thermostat and the 2 wires from my A/C unit from the control board ICM 271 and seem to be having trouble getting them back to the proper places. Control board has C-Y-GC-GH-R-W and the thermostat has RH-RC-W-Y-G and the 2 wires coming in from the A/C unit are both...

Wiring a furnace thermostat to manually operate the furnace fan [ 2 Answers ]

I have two wires connected to my furnace thermostat. There is a place labeled G on the thermostat. Can I simply run a wire from the G terminal on my thermostat to the terminal labeled G on my furnace fan relay to operate the fan separately?

Goodman furnace guso50-2 thermostat wiring instructions for 2 wire thermostat [ 2 Answers ]

Looking to hook up a 2 wire heat only thermostat as the door with the weiring diagram is missing it's a goodman guso50-2?

Wiring a furnace thermostat [ 1 Answers ]

I have a new Rheem Classic 90plus furnace without A/C. It's controlled by a White Rodgers programmable thermostat(1F80-224). I want to change to a non programmable and recently tried to install a Hunter heat only thermostat. The existing W/R thermostat was wired; white wire to W, green to G, red...

Add on coal/wood furnace thermostat wiring for 2 zone house with oil furnace [ 1 Answers ]

I purchased a Harman wood / coal furnace model SF-2500 (forced hot air system) and am tying into my existing forced hot air oil furnace 2 zone system and do not know how to tie into the existing thermostats and zones. I wish to still use the 2 separate zones for the bedrooms and the main body of...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.