 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Need help wiring my thermostat to furnace.
I removed the 4 wires from my thermostat and the 2 wires from my A/C unit from the control board ICM 271 and seem to be having trouble getting them back to the proper places. Control board has C-Y-GC-GH-R-W and the thermostat has RH-RC-W-Y-G and the 2 wires coming in from the A/C unit are both black. Thought I could do this but guess I should have taken pics first. Any help would be great. Thanks.
|
||||
Check out some similar questions!
I have two wires connected to my furnace thermostat. There is a place labeled G on the thermostat. Can I simply run a wire from the G terminal on my thermostat to the terminal labeled G on my furnace fan relay to operate the fan separately?
Looking to hook up a 2 wire heat only thermostat as the door with the weiring diagram is missing it's a goodman guso50-2?
I have a new Rheem Classic 90plus furnace without A/C. It's controlled by a White Rodgers programmable thermostat(1F80-224). I want to change to a non programmable and recently tried to install a Hunter heat only thermostat. The existing W/R thermostat was wired; white wire to W, green to G, red...
I purchased a Harman wood / coal furnace model SF-2500 (forced hot air system) and am tying into my existing forced hot air oil furnace 2 zone system and do not know how to tie into the existing thermostats and zones. I wish to still use the 2 separate zones for the bedrooms and the main body of...
I am putting in a new furnace and thermostat. The connections on the furnace are C G R W1 W2. The connections for the thermostat are B O Y G W RC RH. There is a jumper wire on RC and RH. The thermostat instructions say to run the hot wire to RH and the neutral wires to W and G. I am using 3...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
