 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
p0340 & p1391 codes on a 1999 Durango 5.9
Hi. I just saw these codes pop up yesterday after I replaced the harmonic balancer on my '99 Durango. It barely runs, feeks like it wants to die. I know the codesare for the crank and cam sensors. Now, I jamed a large screw driver into a square hole next to the flexplate to the motor from turning as I removed the crank bolt. I noticed I accidentally messed up the square hole. Are these holes what the crank sensor read? How can I fix the rough running motor? Thanks a lot!
|
||||
Check out some similar questions!
Where are the p0320 and p1391 sensors located in the dodge intrepid?
Starts easy smooth idle miss at 1500 up it has new plugs. Wires fule pump injectors the miss is bad like out of time it pops back some 120000 mils
I have a 2000 Durango 4.7 eng. With trouble codes - P0340 ,P0320 ,P1391. Recently the car dies while driving and when I try to restart it the RPM surges right before it dies . If I let the car set for a few moments then restart it , it will start up with a rough idle which then I place it in...
1999 dodge durando 318 magnum 4x4 have changed all sensors that computer has given codes for. Driving @ about 50, 55 mph it starts to sputter & almost shut off. The service engine light is not on. You can let it idle & it starts to overload with gas, can you tell what is causing it to do that? And...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
