Ask Experts Questions for FREE Help !
Ask
    bossy3's Avatar
    bossy3 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Feb 5, 2010, 12:39 PM
    1999 dodge durango sputting
    1999 dodge durando 318 magnum 4x4 have changed all sensors that computer has given codes for. Driving @ about 50, 55 mph it starts to sputter & almost shut off. The service engine light is not on. You can let it idle & it starts to overload with gas, can you tell what is causing it to do that? And how to fix it please.
    Thanks
    Bossy
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Feb 5, 2010, 02:06 PM

    . Clear all old codes with a code reader.

    . Ensure spark plugs (Champion only) have been changed in the last 3 years. Use the same plug number that originally came in the engine.

    . Replace the CD ignition control module, if the problem persists.
    bossy3's Avatar
    bossy3 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Feb 5, 2010, 02:12 PM
    Quote Originally Posted by TxGreaseMonkey View Post
    . Clear all old codes with a code reader.

    . Ensure spark plugs (Champion only) have been changed in the last 3 years. Use the exact same plug number that originally came in the engine.

    . Replace the CD ignition control module, if the problem persists.
    Where is the CD ignition module located?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #4

    Feb 5, 2010, 02:14 PM

    Check on top of the wheel wells. It may be a ventilated box.
    bossy3's Avatar
    bossy3 Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Feb 5, 2010, 02:15 PM
    Quote Originally Posted by TxGreaseMonkey View Post
    Check on top of the wheel wells. It may be a ventilated box.
    Thank you
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #6

    Feb 5, 2010, 02:21 PM

    Follow the wiring from the distributor.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1999 dodge durango code 1899 park/neutral safety switch [ 0 Answers ]

I have replaced the park/neutral safety switch on my 99 durango after it came up with the code for it being the reason my check engine light is on. I tested the three wires leading into the switch itself but the only one without power is the black and white one. The only thing I can speculate is...

I have a 2002 Dodge Durango. The motor died, so I replaced it with a 2001 Durango mo [ 1 Answers ]

I have a 2002 Dodge Durango. The motor died, so I replaced it with a 2001 Durango motor. I changed the computer system also, because after replacing the motor it did not start. I had not luck with the computer system either. My truck still does not start. When I hooked it up to a diagnostic...

How do you change a heater core in a 1999 Dodge Durango? [ 0 Answers ]

How do you get to the heater core in a 1999 Dodge Durango?

1999 dodge durango code P0783 and how can you fix it [ 0 Answers ]

Will not go into overdrive

View more questions Search