 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have a fireplace with an electric starter that will not lite.
This is considered to be a fake fireplace that will light using gas but has a relatively low heat signature so it is used as decoration.
When I flip the electric starter switch it will click for a few seconds and then stop. The gas supply has been turned on at this time but goes not light. The company that made this model is no longer in business. Do I need to clean a port or widen an orifice on the gas. Thank you for your time in answering this. Gary/ |
||||
Check out some similar questions!
So I want to go and buy an electric fireplace for my house but I don't want my electric bill to sky rocket, I mean I would expect it to go up a little, so does anyone know?
I turned my gas fireplace on and the pilot lit fine and stays on but I can not get the main fire to go on. I have cleaned the thermocouple and other device on other side of pilot and also tried jumping the thermostat at wall and at fire place but no luck.
My electric fire place heats up for only 5 minutes or so. Is it the thermostate and how do I change it
Hi, my Dimplex electric fireplace fan seems to be broken. When I flip the first switch, the lighted fire display still works. When I flip the second switch, the heater element below turns red and heat is generated but it does not blow out the bottom and there is no sound of the fan engaging. How...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
