Ask Experts Questions for FREE Help !
Ask
    Melvin Borrego's Avatar
    Melvin Borrego Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 17, 2013, 09:19 AM
    scotts lawn mower model 42589x8
    Need help in starting, Scott lawn mower 42589X9. Need help in what to do, the batt. Is up and the start is getting power. Not sure what knob or peddle to hold down?
    >personal email removed per site rules<
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Apr 28, 2013, 11:03 AM
    Hi,
    Your Scotts was made by the Noma division of Murray. Most commonly failed are the fuse, solenoid and key switch. Often there is a panel in front of the seating area beneath the steering column held on by two Phillips screws that will reveal both the fuse and the solenoid. For a parts breakdown to refer to, take this link:
    http://www.outdoordistributors.com/p...PARTS-LIST.pdf
    Peace,
    Clarke
    PS It is a nice printable pdf format.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Scotts 3 in 1 lawn mower [ 0 Answers ]

Looking for the schematics on my scotts 3 in 1 mucher, self propelled lawn mower

murray scotts 16 hp 42589x8 automatic noise [ 1 Answers ]

I have a 1999 16hp Murry /Scott's lawn mower. It's an automatic with cruse control, Model # 42589x8. When I push the peddle forward it chatters bad, not so bad in reverse. Tractor does move froward and backwards, but slowly. Tractor came from a friend. My old tractor bought the farm last week. I...

Scotts 42589x8 hydrostatic transmission troubleshooting help [ 1 Answers ]

Help! My riding mower will no longer move. I know enough to be dangerous and can follow some troubleshooting guides to check out the transmission. Thanks in advance

Scotts 42589x8 [ 1 Answers ]

I have a scotts model # 42589x8. Iwouldlike to know who made it. What year it is. What the part # is for the deck and where I may possibly find one

Belt diagram for scotts lawn mower by John Deere [ 1 Answers ]

I need a belt diagam for a scotts lawn mower by John Deere. It is a 20horsepower motor and 48 in cut.

View more questions Search