Ask Experts Questions for FREE Help !
Ask
    ABrooks's Avatar
    ABrooks Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 27, 2013, 07:17 AM
    Craftmade ceiling fan light kit installation
    I have a Craftmade ceiling fan with light. The bulb in the light fixture has just blown. However, I see no way to remove the globe to get at the bulb. There are no screws holding the globe in place; it justs seems to be fitted right into the metal, decorative ring that surrounds it. Any ideas on how to pop the globe out so that I can replace the bulb(s)?
    The fan is white on white; unfortunately I don't have the model number.
    AnswerMan5000's Avatar
    AnswerMan5000 Posts: 186, Reputation: 3
    Junior Member
    		  
    #2

    Apr 28, 2013, 08:16 AM
    Do u have the make at least, e.g.. Original, then we can try to locate a manual for u
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    Apr 28, 2013, 09:11 AM
    Most globes like you describe have threads in their glass. Put your palm on the globe, push up with moderate force and give a sharp twist counterclockwise, repeat a few times.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Adding a light kit to ceiling fan w/ light & dimmer switch [ 6 Answers ]

I would like to add a light kit to a ceiling fan(cannot find a name on it) that is currently hooked and working up in our family room - since we moved in 6 years ago (house was built in 1991). I would like this to operate like our bedroom ceiling fan (which already has a light attached) and...

Replacing ceiling fan light kit with new light kit. [ 0 Answers ]

HI everyone, I am replacing a light kit on a fan with a new light kit. The old kit is attached using a 6-wire plug and the new light kit only has 2 wires. What kind of wire modification can I make to connect the white wire from the new light kit to attach to the plug on the old kit? I really...

3 Light kit ceiling fan installation [ 3 Answers ]

I need help installing a ceiling fan light pull chain. I'm not sure what type of fan it is and I'm not sure how to wire it. All I know is that there is a white and blue wire coming from the ceiling. There are 3 lights which each have a black and white wire. The old switch had 2 black wires and...

Attaching light kit Craftmade ceiling fan [ 4 Answers ]

I have Craftmade ceiling fan. I bought a generic Harbor Bay ceiling fan light kit. It seemed very straight forward installation, white to white, black to blue, but afterward the light would not work. I know the light bulbs work, I've tested them. The fan still works. On the wall is a...

Installing a light kit on a ceiling fan where a switch enables both fan and light [ 2 Answers ]

I have a Hampton Bay ceiling fan with three wires emerging from the top: white, black, red, and green. Presently the white, black, and green are hooked up to a switch and the fan works fine. The red is capped. The fan also has a chain which I intend on keeping on the medium setting indefinitely. ...

View more questions Search