 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Where does gray wire connect on a honeywell rth6350 thermostat
My old thermostat was a honeywell CT3611. I bought a new Honeywell RTH6350 programmable thermostat and cannot figure out where to connect the gray and blue wires coming from the wall. There is also a red yellow green and white wire. The old thermostat has C, E, W1, E, L and B terminal connectors that are not on the new one.
The new thermostat has Y2, W2, G, W, Y, R, Rc, across the top and L, Aux, G, Ob, Y, R, and Rc across the bottom set of connectors. Heat Pump is stamped next to the lower set of connectors and "conventional" is stamped next to the top connectors. We have an Armstrong Electric furnace with heat pump. It's about 10 years old. Thank you for your help. |
||||
Check out some similar questions!
Hello, I would like some help with this installation, I have a white, red, green and blue wire coming out of the wall. My question is where do I put the blue wire? Thanks
I am changing thermostats from a Honeywell T8411R 1002 to a Honeywell RTH6350 D1000 My problem after following instructions is where to put the "C" wire? I am using a heat pump York Model F RP030H06A and the blower outside is E1RC024S06C Here is a picture of existing wiring:...
Insert stove
The fan switch what does the gray wire connect to
I currently have two zones for cooling only and the thermostat wires are red, blue and white. The red is labeled Rc which is easy, the white is labeled W Heat (this doesn't make sense to me) and the blue is labeled cool? What I think I need to do is connect the red to the Rc on the thermostat,...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
