Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to measure Danfoss water pressure sensors & switches with a multimeter?
[ 0 Answers ]
I am always confused whenever there is a chance to check the water pressure sensors & switches, using a multimeter to get to know if they are still in good working condition or not. Is there one sure way to do that, please?
Compressor panels too dirty to measure freon pressure?
[ 2 Answers ]
I'm having problems with my A/C unit. A service technician came to My house, looked at the compressor unit, and told me the panels Were full of debris that he couldn't accurately measure the freon Pressure. He asked to clean the panel for $89, which did not Include the service call, another ...
Passed gas pressure test at 15 psi, but pressure slowly drops, is this OK?
[ 4 Answers ]
Passed inspection on our gas line for a remodel. Have about five capped gas outlets. Pressure held @ 15 psi for 15 minutes but slowly drops about one psi every half hour or so. Is this normal or do I need to search for a gas leak? View more questions Search
|