Ask Experts Questions for FREE Help !
Ask
    bowlinggirl47's Avatar
    bowlinggirl47 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 27, 2007, 09:25 PM
    Oil pressure
    I have high oil pressure and I have changed the oil pressure gauge switch and it still reads 80 and over
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Mar 27, 2007, 09:29 PM
    Problem may be with the gauge, not the switch. Remove the switch and temporarily install a mechanical gauge, which are more accurate. It should prove whether the original gauge is any good.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Oil Pressure Gauage [ 3 Answers ]

I have a 2002 Ford Ranger that Oil Pressure Gauage flickers. It appears that the truck is losing oil pressure according to the gauage, but it is not. I've have had the oil pressure checked by the Ford dealer twice and the oil pressure is fine. Mechanical the truck runs great. The Ford dealer...

Oil Pressure gauge, going bad? [ 2 Answers ]

My f-150 has only 77.000 original miles,I'm the 2nd owner. Previous owned said not to freak out when I came to a stop and the oil pressure gauge drops to nothing,that it had always done this. I've put 3,000 miles on it since and it does the same thing with me,but it doesn't seem to be going dry of...

Low oil pressure [ 3 Answers ]

I have a 2003 ford explorer, and out of nowhere my low oil pressure light has come on and automatically shuts everything down. I've checked and the oil level is perfect, I've had no problems what so ever. The oil has been changed regularly at 3000 miles. I've had one person say oil pump and another...

Oil Pressure Gauge [ 2 Answers ]

Where is the best location to install the oil pressure gauge for a "Correct" reading? A "Mechanical" gauge,sorry!

90 Accord oil pressure sender [ 1 Answers ]

I noticed an oil leak from above my oil filter on my 90 Accord. It looks like the oil pressure sender. Has anyone changed one out? Does the wiring just unclip? Any special socket needed? Is it common to leak? Thanks for your help. JD

View more questions Search