Ask Experts Questions for FREE Help !
Ask
    Tbecker2's Avatar
    Tbecker2 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 1, 2013, 06:21 PM
    Door adjustment on GE Model GSS23SGSBSS
    When we open our refrigerator door half way, it continues to swing out and crash into our counter. It actually picks up speed on its own. I have tried the door adjustment screw but no luck. Any suggestions would be appreciated.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Apr 1, 2013, 07:08 PM
    Sounds like the refrigerator could be out of level. Put a level on the top. Should be level across the top and level or slightly tilted back.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman 15.5 hp model 917.256810, belt adjustment [ 1 Answers ]

I have a Craftsman 15.5 HP lawn tractor Model 917.256810. The belt drive is loose. How can it be adjusted to tighten it?

Adjustable door threshold adjustment [ 3 Answers ]

I have installed an exterior (very heavy) pre-hung door manufactured for me by a local shop that is now out of business. My very new hardwood floors come up high on the threshold, leaving not enough room for an entry carpet inside the door which will cause excessive water in this area from the...

Garage Door adjustment [ 4 Answers ]

I just recently bought a new garage door opener I use all the old wires and chain and just replaced motor after installing the door It doesn't go all the way down I turned down adjustment screw on side all the way and will only go about half way down still sensors are on it and seem to be working...

View more questions Search