Ask Experts Questions for FREE Help !
Ask
    jer22's Avatar
    jer22 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 1, 2013, 05:46 PM
    Charging of a new dry condenser unit with 422d
    Can I charge a new unit with 422d or not?
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Apr 2, 2013, 03:58 PM
    No.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Air conditioning condenser unit runs but fan in condensing unit goes on and off [ 1 Answers ]

Outside unit compressor runs but outside fan goes on and off. Any suggestions?

When charging a condensing unit [ 1 Answers ]

Do you hook the gauges to charge the unit to the suction line or liquid line?

Ac condenser unit not turning on [ 0 Answers ]

I tried to turn on my AC for the first time this season and about a half hour later I realized it was not any cooler in the house. Thermostat is set to cool, 6 degrees cooler than the room temp, the fan is blowing but the air is not cool. I checked on the condenser and nothing is on, no fan no...

A/c condenser unit [ 1 Answers ]

Ac unit will not turn on. Relay at condenser comes in and power is on both sides of relay. No cooling

Charging Home Unit [ 2 Answers ]

On the gages which I have, are three scales... One in Black PSI), one in Green for R-22, and one in red for R-12 refrigerant. It was suggested that I add refrigerant till the suction side (LP) is about 55-60 PSI and the Head pressure is 150-175 psi. I did this and the unit is 'cooling' however is...

View more questions Search