 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Originally Posted by JMarx
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Good morning speedball, I am very clear on the theory of electrolysis and such between dissimiliar metals in solutions. But I have read that one can use brass fittings in leiu of a dielectric device. I find that hard to be true. Brass may have properties which can slightly negate the battery...
Hello - I've just installed a new hot water tank, and have two leaks. Each leak is at the dielectric unions. The leaks are very slow. I even took the union apart, cleaned the thread, re-applied the teflon tape and put them back together. I have the same slow drip, on both the hot and the cold...
A hot water heater has gav. Nibbles how long will a copper fitting last hook to is and how long will a dielectric union last how long have the dielectric union been out or made?
Are there dielectric unions that also act as a reducer?
What is the estimated cost of putting in a dielectric union in a crawl space with about three feet of clearance between a copper/galvanized joint from a licensed plumber? Thanks! Hammer
View more questions Search
|
