[dagden]

Is there a way I may correct this or does a repair person need to be called? Washer last used two days ago and this light was on when I went to use it today. I unplugged the washer for about 15 min. but this did not solve the problem?
Thank You.

[Stratmando]

You didn't say which model. It may require holding a button(s) down for a couple of seconds.

[dagden]

The control locked light is on and the washer does not respond to any other command on the panel. I last used the washer two days ago and did nit experience or notice any problem. When I went to use it today the control locked light was on and there was no response when trying any other selection/button. I also unplugged
The washer for about 15 min. also to no avail.

[Stratmando]

Try holding down the end of cycle signal for several seconds, if it doesn't turn off, unplug for at least 30 minutes to force unlock.
Good Luck